downhill braking tips

downhill braking tips google doc

While driving and travel, of course there are many types and variations of the way we've been through. The streets can be straight and flat, but can also be of the road is the rise and fall is happening constantly.

If the place you're going to have a long downhill track and repetitive, the car's braking system must be in optimum condition. Not only that, you are also required to be able to use the features to restrain the rate of vehicles by utilizing the engine rotation or commonly called engine brake. Especially if your car has a fairly heavy load and long downhill ride. In this way, the braking load will not be covered in full by your car brakes.

Braking loads that are too heavy will make the brake system becomes excessive heat. This can lead to the brakes become less responsive or even tension. It is certainly dangerous for your trip. Therefore, it helps you learn how to make engine brake correctly to the car with a manual transmission or automatic transmission.

 How Car Engine Brake Manual

For a car with a manual transmission, engine brake can be done by lowering the position of the transmission to a lower position. But before that, need to be considered to reduce the transmission position gradually so as not to cause damage to the engine. In addition, note also rev the engine is running so that the engine is not jerked suddenly. Generally, engine braking can be done when the engine rotation is in the range of 3,000 rpm. To reduce the vehicle speed and engine rpm, we must first be able to perform braking in advance.

How Matic Car Engine Brake

In principle theory, engine brake on the car matic also be done through the same shift down as in a manual car. For transmission that features over drive or O / D, you can turn off the feature to be able to lower the transmission position. However, the engine brake is obtained is not too significant.

Matic engine brake for cars that do not have a choice over the drive, you can immediately lower the transmission position from D to 3, 2, or also the position of L. But keep in mind just like a manual car, the engine rpm must be in the proper position while doing down shifts. Generally, the transmission can not be moved when the rpm on the red line. If not, then the car will be yanked and feel less comfortable.

Some of the cars with the latest automatic transmission usually equipped with features that can automatically brake when the engine through the streets of a dip or decreased. Examples are the features Grade Logic Control contained in Honda car with automatic transmission. This feature is certainly very helpful to perform engine braking without having to be bothered to replace the gear lever itself.