changing Tires when alone

changing Tires when alone google doc

For people who are new to driving your own car, of course there are still many things to be learned for the convenience of travel. One is about how to replace the tires themselves. This is particularly important if a sudden blow out tire or a leak while on the trip. To that end, here are some steps on how to remove the tires and how to install it correctly.Changing Tires Alone check this out

The first thing to do when a tire suddenly deflated or leaking is you slowly pull over to a safe side street, quite roomy and has a hard surface to make the process of replacement tires. Do not suddenly pulled over, note the presence of other vehicles as well. After that, do not forget to activate the handbrake, turn on the hazard lights and warning triangle tides several meters behind the car. If you're on a hill or a derivative, then use wood or stone to prop up car tires.

Next, prepare the necessary equipment such as wheel locks, car jack and spare tire course. Put all of this equipment in an accessible part that you do not need pacing.
Then open the manhole cover bolts if any. You could fit this part with a screwdriver. And loosen the bolt car by using wheel locks. To loosen, turn the bolt opposite clockwise. When loosen, done by bersebrangan between the screw that one with the next. Loosened just enough in advance, not to loose.

Attach the car jack at the near the wheel to be replaced and has a solid structure. Typically, a guide to put the jack point is contained in the manual. But if not, then select the section near the wheel and has a basin or a place to put the jack point. Generally, every car has a jack point is. Make sure the jack is already perpendicularly between the ground and the car, then use the jack to lift the car tires to the position that you think is easy to remove the tire. If it starts to lift jack tilted, then lower and repeat with the jack position fix first.

After the ban was lifted, then open the tire bolts until completely detached all. Save these screws because the round shape tends to be serious repercussions rolled on a highway and lost. Then remove the tire from its place and put it in a safe place in a sleeping position. Never put a tire in a standing position.

Take a spare tire or spare tire that has been prepared, and then install the proper position. You may need a little rattled when entering the tire into place really is right and fitting. Once completely fit, replace the bolts with bersebrangan way between the one with the next. Do not be tightened, just plug in position only until it feels heavy or hard enough.

Lower the jack slowly until the tire touches the ground intact. Remove the jack out of place. Then begin to tighten the bolts one by one with a cross pattern again and make sure the bolts are actually attached with strong and toned. If you are not sure and will tighten the bolts using the legs, ensure wheel locks are installed properly on the bolt tires. If not, the key will be tucked and bolts become worn or loss. So in this way is less recommended!

If so, take back the jack, wheel locks, tire your car and other equipment and then put back into the car. Congratulations, you've been able to continue the journey back. Do not forget to repair a punctured tire had to be reusable.