cleaning up Water-cooled car

cleaning up Water-cooled car google doc

Water-cooled car owners, must take care of the radiator trim. If treatment is not carried out properly, or not treated at all, be sure these devices are easily damaged. The impact, the engine overheating.

There are special tips to help avoid damaging the engine's cooling devices. First, provide a wrench or ring 10,12 and 14 as well as a Phillips screwdriver (+) and min (-). Not to forget the duster and cleaning fluids tiled floors.
Here are four easy ways to clean a car radiator:

Remove the radiator with the key mentioned above. Then drain the water in it. Tie a water hose on the issuing of water at the bottom with a rubber band, Pour
floor cleaning fluid enough to 'burrow' radiator slowly. Allow a few moments for the blockage in the bulkhead radiator loss.

Furthermore, waste water immersion and rinse with clean water radiator. After rinsing, make sure the conditions are completely clean of any excess liquid foam floor cleaner. Now radiators are guaranteed clean and free of dirt that interfere with the circulation of water in the radiator.

Should clean the grille or the radiator cooling fins once a week. The trick, use a plastic brush or brush for washing clothes. Clean it, first provide a bucket of water mixed soap or shampoo, brush and iron wire.

In the dry state, clean it with a brush that is able to clean up all the dirt. Then, wash with soapy water radiator evenly. Finally, use an iron wire to straighten crooked septum with gouged and flattened again as before.